Additional information
| ∅ (mm) | 400, 480 |
|---|---|
| Capacity | 20L, 31L |
TUBRA round slim high
1,00 zł
Instruction
Instructions for Use – Planters with a Removable Insert
- Tall and Low Planters
- Tall planter – requires ballast (e.g. gravel, expanded clay) to be added through the large filling hole.
- It should not be used without ballast.
- Once filled, the hole must be sealed with the stopper.
- Low planter – can be used without additional ballast. It is also fitted with a large filling hole and stopper.
- Stoppers – Filling and Drainage
- Large filling hole – used for adding ballast to stabilise the planter. Simply remove the stopper, add the material, and replace the stopper. There is no need to turn the planter upside down.
- Small drainage hole – allows excess water to drain from the insert. This hole is factory-drilled.
- It may be kept closed or open, depending on where the planter is used.
- The stopper for this hole is stored in a dedicated compartment inside the planter.
- Preparing the Removable Insert
- Remove the insert from the planter.
- Drill a hole in the designated spot to allow water to drain freely into the base of the planter.
- Place the insert back into the planter.
- Using the Planter in Different Settings
- Indoor use (e.g. at home) – close the small drainage stopper to prevent water from leaking onto the floor (e.g. panels, parquet).
- Outdoor use (garden, lawn) – there is no need to close the drainage stopper; water can flow out freely and soak into the ground.
- Balcony or terrace use – it is recommended to close the small drainage stopper to avoid water spilling onto the surface.
Specification & Logistics
| SKU | Fi (mm) | Height | [L] | PCS | PCS pallet | Pallet size |
| TTS40H | 400 | 1100 | ~18 | 1 | 12 | 1200 x 800 mm |
| TTS48H | 480 | 1350 | ~33 | 1 | 3 | 1200 x 800 mm |